Polyaspartic Coatings
in Brocklehurst, BC
Fast-cure, UV-stable, and engineered for BC Interior climate extremes.
Polyaspartic coatings are a class of aliphatic polyurea compounds that cure significantly faster than traditional epoxy — 2–4 hours at 15°C versus the 12–24 hours of standard epoxy systems — while offering superior UV stability and cold-temperature flexibility. They're our default topcoat choice on all residential garage floors and are increasingly used as complete single-coat or dual-coat systems on commercial floors where rapid return to service is required. UV-stable means they stay clear and colour-fast under direct sunlight without chalking or yellowing — critical in Kamloops's high-UV interior climate.
Polyaspartic Coatings in Brocklehurst: what you need to know
Polyaspartic systems are a natural fit for Brocklehurst's working garages — fast cure means less disruption, UV stability means they don't yellow under the occasional sun, and the cold-temperature flexibility handles the north-shore winters. We use polyaspartic topcoats on virtually every Brocklehurst garage.
Properties and context in Brocklehurst
Mix of post-war residential homes, 1970s–80s construction, and some newer infill development. Light commercial properties and small businesses are scattered through the neighbourhood. A lot of working garages in Brocklehurst — people park real vehicles and store real equipment here.
Brocklehurst is a practical, working-class community with deep roots on the north shore. Homeowners here want floors that hold up through years of hard use, not just floors that look good on the day of install.
Concrete conditions in Brocklehurst
North Shore slabs in Brocklehurst deal with more ambient moisture than south-side Kamloops — river proximity and shadier lots keep humidity higher. Older slabs in the area commonly show surface scaling from freeze-thaw cycles, trapped moisture, and old oil contamination in garages that have been used hard. Diamond grinding is always required here — acid etching won't cut it.
Climate and floor performance in Brocklehurst
Brocklehurst sees colder winters than the south side, river valley humidity, heavy freeze-thaw action, north-facing exposure. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Polyaspartic Coatings install
- Surface preparation (diamond grinding to required CSP)
- Moisture vapor testing
- Polyaspartic primer or base coat
- Decorative flake broadcast (optional)
- UV-stable aliphatic polyaspartic topcoat
- Cure in 2–4 hours at 15°C+
- Vehicle-ready in 12–24 hours
- Temperature-appropriate application scheduling
How a Polyaspartic Coatings install works in Brocklehurst
Application temperature check
Polyaspartic coatings are temperature-sensitive — application works between 5°C and 35°C, and cure rate changes significantly with temperature. We schedule installs for appropriate conditions and heat the space if necessary in cold weather.
Surface prep
Same diamond-grinding prep as epoxy — CSP 3–4 for most residential and commercial applications. Moisture testing, crack repair, and slab prep are identical to an epoxy system.
Coating application
Polyaspartic coatings have a shorter working time than epoxy — application requires speed and skill. We don't let new applicators run polyaspartic systems on client floors.
Fast cure and return to service
Light traffic in 2–4 hours. Vehicles in 12–24 hours. Full chemical resistance at 72 hours. The fast cure is particularly valuable for commercial installs where downtime is expensive.
Ready for a quote in Brocklehurst?
We come to you — free on-site consultation, no travel charge. We serve Brocklehurst as part of our core Kamloops service area. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in Brocklehurst
Polyaspartic Coatings
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineBrocklehurst service area
All services in BrocklehurstAbout this service
Polyaspartic Coatings — full service detailPolyaspartic Coatings in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.