Concrete Resurfacing
in Brocklehurst, BC
Worn, pitted, or stained concrete that's still structurally sound — resurfaced, not replaced.
Concrete resurfacing is the right call when a slab is worn, pitted, stained, or uneven on the surface but still structurally intact underneath. Instead of tearing out and replacing the slab — which is expensive and disruptive — we apply a polymer-modified overlay that bonds to the existing concrete and gives you a fresh, level surface to coat or leave natural. The key is an honest structural assessment first: resurfacing fixes surface problems, not structural ones. We won't resurfacing a slab that needs to be replaced.
Concrete Resurfacing in Brocklehurst: what you need to know
Brocklehurst's older housing stock has plenty of concrete that's seen freeze-thaw surface scaling without going through to structural failure. Resurfacing these surfaces is more economical than slab replacement and gives a durable, clean result.
Properties and context in Brocklehurst
Mix of post-war residential homes, 1970s–80s construction, and some newer infill development. Light commercial properties and small businesses are scattered through the neighbourhood. A lot of working garages in Brocklehurst — people park real vehicles and store real equipment here.
Brocklehurst is a practical, working-class community with deep roots on the north shore. Homeowners here want floors that hold up through years of hard use, not just floors that look good on the day of install.
Concrete conditions in Brocklehurst
North Shore slabs in Brocklehurst deal with more ambient moisture than south-side Kamloops — river proximity and shadier lots keep humidity higher. Older slabs in the area commonly show surface scaling from freeze-thaw cycles, trapped moisture, and old oil contamination in garages that have been used hard. Diamond grinding is always required here — acid etching won't cut it.
Climate and floor performance in Brocklehurst
Brocklehurst sees colder winters than the south side, river valley humidity, heavy freeze-thaw action, north-facing exposure. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Concrete Resurfacing install
- Structural soundness assessment (we'll tell you if replacement is needed instead)
- Diamond grinding or shot-blasting of existing surface
- Crack and void filling
- Polymer-modified overlay application
- Surface finishing and curing
- Optional epoxy or polyaspartic coating on top
How a Concrete Resurfacing install works in Brocklehurst
Assessment
We assess whether the slab is structurally sound. Resurfacing is for surface problems — worn aggregate exposure, pitting, staining, shallow scaling. Structural cracking, heaving, or significant settlement requires replacement.
Surface prep
The existing surface needs to be properly profiled for the overlay to bond. Diamond grinding or shot-blasting opens the surface and removes the weak layer. Cracks and voids get filled.
Overlay application
The polymer-modified overlay is applied to the prepared surface in a controlled thickness. It bonds to the existing concrete and cures to a clean, fresh surface.
Finishing
The resurfaced slab can be left as-is with a sealer, or we can apply an epoxy or polyaspartic coating system on top for a premium finish and additional protection.
Ready for a quote in Brocklehurst?
We come to you — free on-site consultation, no travel charge. We serve Brocklehurst as part of our core Kamloops service area. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in Brocklehurst
Concrete Resurfacing
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineBrocklehurst service area
All services in BrocklehurstAbout this service
Concrete Resurfacing — full service detailConcrete Resurfacing in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.