Concrete Resurfacing
in North Kamloops, BC
Worn, pitted, or stained concrete that's still structurally sound — resurfaced, not replaced.
Concrete resurfacing is the right call when a slab is worn, pitted, stained, or uneven on the surface but still structurally intact underneath. Instead of tearing out and replacing the slab — which is expensive and disruptive — we apply a polymer-modified overlay that bonds to the existing concrete and gives you a fresh, level surface to coat or leave natural. The key is an honest structural assessment first: resurfacing fixes surface problems, not structural ones. We won't resurfacing a slab that needs to be replaced.
Concrete Resurfacing in North Kamloops: what you need to know
Concrete resurfacing in North Kamloops is common — the older stock in the neighbourhood has a lot of surface-worn concrete that's structurally fine but looks bad and provides a poor bonding surface for coatings. Resurfacing creates the fresh surface that a quality coating needs.
Properties and context in North Kamloops
Older residential neighbourhood with heritage-era homes, 1960s–70s builds, and newer infills on smaller lots. A mix of small commercial and light industrial properties along the main corridors. Compact lots with attached or detached single-car garages are typical.
North Kamloops is a tight-knit community with a long history in the city, and it's been undergoing a quiet renewal with newer infill homes alongside original long-term residents. There's a strong community identity here.
Concrete conditions in North Kamloops
North Kamloops has some of the oldest residential concrete in the city. Hairline cracking from foundation settlement is common, and many slabs show surface laitance — the weak carbonated top layer that forms on older concrete and prevents coating adhesion unless properly ground away. We always grind back to solid concrete in this neighbourhood, not just clean the surface.
Climate and floor performance in North Kamloops
North Kamloops sees cold winters, river valley humidity, freeze-thaw cycles, some wind exposure from the Thompson canyon. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Concrete Resurfacing install
- Structural soundness assessment (we'll tell you if replacement is needed instead)
- Diamond grinding or shot-blasting of existing surface
- Crack and void filling
- Polymer-modified overlay application
- Surface finishing and curing
- Optional epoxy or polyaspartic coating on top
How a Concrete Resurfacing install works in North Kamloops
Assessment
We assess whether the slab is structurally sound. Resurfacing is for surface problems — worn aggregate exposure, pitting, staining, shallow scaling. Structural cracking, heaving, or significant settlement requires replacement.
Surface prep
The existing surface needs to be properly profiled for the overlay to bond. Diamond grinding or shot-blasting opens the surface and removes the weak layer. Cracks and voids get filled.
Overlay application
The polymer-modified overlay is applied to the prepared surface in a controlled thickness. It bonds to the existing concrete and cures to a clean, fresh surface.
Finishing
The resurfaced slab can be left as-is with a sealer, or we can apply an epoxy or polyaspartic coating system on top for a premium finish and additional protection.
Ready for a quote in North Kamloops?
We come to you — free on-site consultation, no travel charge. We serve North Kamloops as part of our core Kamloops service area. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in North Kamloops
Concrete Resurfacing
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineNorth Kamloops service area
All services in North KamloopsAbout this service
Concrete Resurfacing — full service detailConcrete Resurfacing in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.