Garage Floor Epoxy
in Chase, BC
Diamond-ground prep. UV-stable topcoat. Ready for vehicles in 24 hours.
Garage floor epoxy is our most requested residential service, and for good reason — a properly installed epoxy system transforms a dusty, stained concrete slab into a durable, easy-clean surface that holds up to vehicles, chemicals, and BC Interior winters. We diamond-grind every slab to CSP 3–4 profile, moisture-test before applying anything, repair cracks and joints, apply a 100% solids epoxy base coat, broadcast decorative flake or finish smooth, and seal with a UV-stable polyaspartic topcoat. The floor is ready for light foot traffic in 12 hours and vehicles in 24.
Garage Floor Epoxy in Chase: what you need to know
Chase garage floors near the lake carry more moisture vapor risk than most Kamloops-area properties — we always run a calcium chloride moisture test here before committing to a system. High moisture vapor emission will cause delamination in any system that doesn't use a moisture-mitigating primer. We've done this often enough in Chase that we know not to skip it.
Properties and context in Chase
Chase property stock is dominated by older 1960s–1980s homes with aging single-car garage slabs, plus a significant number of vacation properties and lakeside cabins around Little Shuswap Lake that often have neglected or uncoated concrete. Some newer retirement housing and a modest commercial strip round out the mix.
Chase is a small lakeside town that values community, outdoor recreation, and a slower pace of life. Many residents are retirees, some are seasonal vacation home owners, and a core of families have deep roots going back multiple generations. They want trades they can trust.
Concrete conditions in Chase
Chase sits beside Little Shuswap Lake and the South Thompson River — ambient humidity is measurably higher than on the Kamloops benchlands. Every job in Chase gets a moisture vapor test before we specify a system. Older homes near the river can have basement slabs with significant moisture vapor emission that requires moisture-mitigating primer before any topcoat. Skipping this step in Chase leads to delamination.
Climate and floor performance in Chase
Chase sees mild lakeside climate with higher ambient humidity than Kamloops, cold winters, moderate summers with lake effect. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Garage Floor Epoxy install
- Diamond grinding to CSP 3–4 surface profile
- Calcium chloride moisture vapor testing
- Crack, spall, and joint repair
- 100% solids epoxy base coat
- Full or partial decorative flake broadcast (or smooth solid colour)
- UV-stable aliphatic polyaspartic topcoat
- Anti-slip aggregate if required
- Same-day clean-up — vehicle-ready in 24 hours
How a Garage Floor Epoxy install works in Chase
Free on-site quote
We come to your garage, assess the slab condition, check for moisture, measure the space, and discuss finish options with real samples. No guessing — the quote is based on what we actually see.
Surface prep (Day 1)
Diamond grinding with industrial planetary grinders opens the surface to the profile epoxy needs to bond. We vacuum with HEPA systems as we go. Cracks get repaired with semi-rigid polyurea or rigid epoxy mortar depending on type.
Base coat + broadcast
100% solids epoxy primer and base coat go down. Decorative flake is broadcast while the base coat is still wet, then knocked down and vacuumed once cured. Colour and flake density match your sample selection.
Polyaspartic topcoat
The UV-stable polyaspartic topcoat seals the system and provides the hard, scratch-resistant surface. It cures in 2–4 hours at normal temperatures and reaches full hardness within 72 hours.
Ready for a quote in Chase?
We come to you — free on-site consultation, no travel charge. We make regular service runs to Chase (~50 km from Kamloops) and don't add a travel fee. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in Chase
Garage Floor Epoxy
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineChase service area
All services in ChaseAbout this service
Garage Floor Epoxy — full service detailGarage Floor Epoxy in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.