Industrial Epoxy Flooring
in Chase, BC
High-build systems for warehouses, manufacturing plants, and facilities that work hard.
Industrial epoxy flooring is a fundamentally different product category from residential garage coating. High-build systems — typically 60–120+ mils total dry film thickness — use epoxy mortar base coats, self-leveling mid-coats, and chemical-resistant aliphatic polyaspartic topcoats to create floors rated for forklift traffic, heavy point loads, thermal shock from hot water washdowns, and chemical exposure from fuels, oils, solvents, and industrial cleaning agents. These systems are engineered for the application, not adapted from residential products.
Industrial Epoxy Flooring in Chase: what you need to know
Chase's small industrial and commercial properties serve a local economy based on tourism, agriculture, and services. We spec industrial floor systems for Chase businesses based on the actual load and chemical exposure — not a default to the most expensive option.
Properties and context in Chase
Chase property stock is dominated by older 1960s–1980s homes with aging single-car garage slabs, plus a significant number of vacation properties and lakeside cabins around Little Shuswap Lake that often have neglected or uncoated concrete. Some newer retirement housing and a modest commercial strip round out the mix.
Chase is a small lakeside town that values community, outdoor recreation, and a slower pace of life. Many residents are retirees, some are seasonal vacation home owners, and a core of families have deep roots going back multiple generations. They want trades they can trust.
Concrete conditions in Chase
Chase sits beside Little Shuswap Lake and the South Thompson River — ambient humidity is measurably higher than on the Kamloops benchlands. Every job in Chase gets a moisture vapor test before we specify a system. Older homes near the river can have basement slabs with significant moisture vapor emission that requires moisture-mitigating primer before any topcoat. Skipping this step in Chase leads to delamination.
Climate and floor performance in Chase
Chase sees mild lakeside climate with higher ambient humidity than Kamloops, cold winters, moderate summers with lake effect. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Industrial Epoxy Flooring install
- Industrial surface preparation (shot-blasting or heavy diamond grinding)
- Moisture vapor testing and mitigation if required
- Heavy-mil epoxy primer
- Epoxy mortar base coat (3–6mm) where leveling is required
- Self-leveling epoxy mid-coat
- Chemical-resistant aliphatic polyaspartic topcoat
- Anti-slip aggregate broadcast
- Floor joint treatment and edge detailing
How a Industrial Epoxy Flooring install works in Chase
Site assessment and spec engineering
We assess the slab, the traffic loads, the chemical exposure profile, and the thermal conditions the floor will see. Industrial spec is not one-size — we engineer the system for the facility.
Industrial surface prep
Shot-blasting or heavy diamond grinding to CSP 5–7 for high-build systems. Existing coatings, contamination, and weak surface layers are fully removed. This is the most labour-intensive step and the most critical.
Multi-coat system application
Each coat is applied to spec and allowed to reach the required cure state before the next coat goes down. Staging and timing are controlled to ensure inter-coat adhesion throughout the system.
Topcoat and return to service
The chemical-resistant topcoat is the final protective layer. Return-to-service schedule is based on the system and the facility's operational requirements — we coordinate staging to minimize disruption.
Ready for a quote in Chase?
We come to you — free on-site consultation, no travel charge. We make regular service runs to Chase (~50 km from Kamloops) and don't add a travel fee. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in Chase
Industrial Epoxy Flooring
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineChase service area
All services in ChaseAbout this service
Industrial Epoxy Flooring — full service detailIndustrial Epoxy Flooring in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.