Concrete Resurfacing
in Chase, BC
Worn, pitted, or stained concrete that's still structurally sound — resurfaced, not replaced.
Concrete resurfacing is the right call when a slab is worn, pitted, stained, or uneven on the surface but still structurally intact underneath. Instead of tearing out and replacing the slab — which is expensive and disruptive — we apply a polymer-modified overlay that bonds to the existing concrete and gives you a fresh, level surface to coat or leave natural. The key is an honest structural assessment first: resurfacing fixes surface problems, not structural ones. We won't resurfacing a slab that needs to be replaced.
Concrete Resurfacing in Chase: what you need to know
Chase's older residential stock has driveways and garage slabs with surface scaling from years of freeze-thaw cycling without sealing. Resurfacing the structurally sound slabs is more economical than replacement and gives a fresh, coatable surface.
Properties and context in Chase
Chase property stock is dominated by older 1960s–1980s homes with aging single-car garage slabs, plus a significant number of vacation properties and lakeside cabins around Little Shuswap Lake that often have neglected or uncoated concrete. Some newer retirement housing and a modest commercial strip round out the mix.
Chase is a small lakeside town that values community, outdoor recreation, and a slower pace of life. Many residents are retirees, some are seasonal vacation home owners, and a core of families have deep roots going back multiple generations. They want trades they can trust.
Concrete conditions in Chase
Chase sits beside Little Shuswap Lake and the South Thompson River — ambient humidity is measurably higher than on the Kamloops benchlands. Every job in Chase gets a moisture vapor test before we specify a system. Older homes near the river can have basement slabs with significant moisture vapor emission that requires moisture-mitigating primer before any topcoat. Skipping this step in Chase leads to delamination.
Climate and floor performance in Chase
Chase sees mild lakeside climate with higher ambient humidity than Kamloops, cold winters, moderate summers with lake effect. We spec epoxy and polyaspartic systems for this area with the local conditions in mind — UV stability, thermal flexibility, and moisture management are all part of our system selection process, not afterthoughts. A coating system that performs well in a temperate climate and a properly spec'd system for the BC Interior are not the same product, even if they look similar on the day of install.
What's included with every Concrete Resurfacing install
- Structural soundness assessment (we'll tell you if replacement is needed instead)
- Diamond grinding or shot-blasting of existing surface
- Crack and void filling
- Polymer-modified overlay application
- Surface finishing and curing
- Optional epoxy or polyaspartic coating on top
How a Concrete Resurfacing install works in Chase
Assessment
We assess whether the slab is structurally sound. Resurfacing is for surface problems — worn aggregate exposure, pitting, staining, shallow scaling. Structural cracking, heaving, or significant settlement requires replacement.
Surface prep
The existing surface needs to be properly profiled for the overlay to bond. Diamond grinding or shot-blasting opens the surface and removes the weak layer. Cracks and voids get filled.
Overlay application
The polymer-modified overlay is applied to the prepared surface in a controlled thickness. It bonds to the existing concrete and cures to a clean, fresh surface.
Finishing
The resurfaced slab can be left as-is with a sealer, or we can apply an epoxy or polyaspartic coating system on top for a premium finish and additional protection.
Ready for a quote in Chase?
We come to you — free on-site consultation, no travel charge. We make regular service runs to Chase (~50 km from Kamloops) and don't add a travel fee. Call us or submit a quote request and we'll be in touch promptly.
Get a quote in Chase
Concrete Resurfacing
Free on-site consultation — no travel charge.
250-800-2316Request Quote OnlineChase service area
All services in ChaseAbout this service
Concrete Resurfacing — full service detailConcrete Resurfacing in nearby areas
Common epoxy floor questions
Everything you want to know about epoxy floors before picking up the phone.
A professionally installed epoxy floor typically lasts 10–20 years with normal use. Garage floors in harsh climates like Kamloops can expect 10–15 years with proper maintenance.
Your epoxy floor won't
coat itself.
Call us or fill out the form and we'll get back to you the same day. Free on-site quotes with no obligation.